0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-04-07 01:51:46
5.8k
356
Report

Kobra X | Exo Magneto Print Head

@iMaars_4917578
Message
Follow
Recommended printing method
Description

Custom honeycomb faceplate for the Kobra X. It’s a quick aesthetic upgrade that snaps on and off easily using magnets.


The Design

  • Magnetic Mounting: Designed for 3mm x 2mm round magnets. They press-fit into the back so you can pop the plate on and off the frame without messing with plastic tabs
  • Single & Multi-Color: The .3mf file is already set up with separate plates. You can run it as a solid piece or do a color swap for the honeycomb inserts.

Print Specs

I’ve dialed this in specifically for these settings to get the best fit and finish:

  • Layer Height: 0.16mm
  • Walls: 3 walls (Gives the hex pattern enough strength without needing heavy infill).
  • Material: Works great in PETG.

Assembly

Just drop a tiny bit of super glue into the magnet holes and press them in. Make sure you check your polarity before the glue dries so it actually sticks to the printer frame!

Tags
kobra
kobra x
anycubic
print
print head
exo
skeleton
magnets
exo magneto
kobra x print head
kobra x print
kobra x extruder
kobra x cover
extruder cover
extruder housing
kobra extruder house
extruder house
print head house
kobra x magnets
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.